|
|
Thermal analysis of fuels
Šrámek, Zbyněk ; Hrnčířová, Michaela (referee) ; Moskalík, Jiří (advisor)
The main goal of this thesis is to introduce the field of thermal analysis as an independent scientific discipline. The first section is mostly informative and introduces into a concept of thermal analysis. The second part describes the most fundamental and essential methods of thermal analysis and the last section is focused on evaluating a real thermogravimetric experiment which deals with biomass sample.
|
|
|
Comparative performance of late stream inoculants in grey cast iron using thermal analysis
Chyla, Ondrej ; Bouška, Ondřej (referee) ; Roučka, Jaromír (advisor)
This diploma thesis in the theoretical part deals with classification of cast iron, problems of gray cast iron production, methods of inoculation and valuation of the gray iron quality by means of thermal analysis. The aim of practical part was to investigate effectiveness of inoculation of two different inoculants using thermal analysis. In terms of mechanical properties, hardness and ultimate tensile strength were measured. Metallographic specimen were evaluating by means of image analysis software.
|
|
|
Utilzation of physico-chemical analyses in study on microbial stress-response
Slaninová, Eva ; Pekař, Miloslav (referee) ; Sedláček, Petr (advisor)
This diploma thesis deals with the utilization of physico-chemical analysis in study on microbial stress–response. The main content of this work was to propose and optimize techniques and methods which are generally used in different industries. Two bacterial strains, Cupriavidus necator H16 and its mutant strain Cupriavidus necator PHB-4 producing polyhydroxyalkanoates (PHA) under certain conditions, were used as model microorganisms. Initially, microscopic teques such as transmission electron microscopy (TEM), cryo scanning electron microscopy (cryo SEM) and atomic force microscopy (AFM) were proposed and tested for the characteriozation of morphological differences of bacteria. Furthermore, viscoelastic properties of bacteria were determined and compared by the oscillatory tests of the rheology method considering another type of samples. Thermal analysis methods, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) in particular, focused on water transport and behavior of intracellular water influenced by presence of the granules of PHB in bacteria. The last technique, utilized in the study, was dynamic and electrophoretic light dispersion during pH changes for characterization of the surface properties of bacteria such as size, zeta potential and the isoelectric point.
|
|
|
Utilization of physico-chemical analysis in study on cellular water
Matejčíková, Eva ; Obruča, Stanislav (referee) ; Sedláček, Petr (advisor)
The bachelor´s thesis deals with the study of methods, available at the Faculty of Chemistry at Brno University of Technology, that can be used to determine physical and chemical properties of cell water. The main task of this work was to specify which of these methods are suitable to determine physical and chemical properties of water in the cell and the properties of water occuring close to the cell surface. Based on the background research the series of experiments were proposed and implemented. Subsequently, this work deals with the optimisation of methods that were defined as the applicable techniques to determine the properties of cell water.
|
|
|
THE APPLICATION OF NANOMATERIALS FOR LEAD FREE SOLDERS DEVELOPMENT
Pešina, Zbyněk ; Pinkas, Jiří (referee) ; Spousta, Jiří (referee) ; Sopoušek, Jiří (advisor)
The present dissertation is motivated by the search for alternatives of lead-free soldering by nanoparticles of metals and their alloys. The research focuses on the possibility of replacing lead-free solders by nanoparticles. This issue is currently being addressed by the use of lead-free solders but their properties are not entirely equivalent to properties of lead-tin based alloys. The theoretical part of the dissertation first summarizes up-to date knowledge on the development of lead-free alloys currently used for soldering in the electronics. The work compares these lead-free solder candidates with previously used Pb-Sn alloys. The second section of the theoretical part is devoted to nanotechnology that offers possible solutions of problems associated with the use of lead-free solders. The text contains a description of the properties of nanocrystalline materials in comparison with those of compact alloys having the same chemical composition. The possibility of preparation of nanoparticles and potential problems associated with small particle sizes are also presented. Introduction of the experimental part focuses on the preparation of nanoparticles of pure metals and alloys by chemical and physical ways as well as on an instrumentation for characterisation and analysis. Attention is focused on the silver in nanoparticle form that exhibits the low temperature sintering effect, which is thermally activated by decomposition of oxide envelope covering the Ag nanoparticles. This factor is critical for low-temperature sintering and thus also for possible future applications. The thermal effects of the low sintering process were studied by methods of thermal analysis. The preparation of the Cu / Ag nano / Cu joints was carried out in-situ in inert atmosphere and under the action of atmospheric oxygen. In both cases varying conditions of thermal treatment were used. The cross sections of the prepared joints were then used for the metallographic analysis of the local mechanical properties of the resulting silver layer, for the chemical composition evaluation of the resulting layers of the joint, and for the microstructure study. Strength characteristics are represented by testing shear strength of individual joints.
|
|
|
Characterization of portland cement hydration products by thermal dilatometric analysis
Dvořáková, Tereza ; Švec, Jiří (referee) ; Šoukal, František (advisor)
The paper presents the results of thermal dilatometric analysis of cement pastes during the heating at high temperatures. Volume changes were observed in samples of cement paste at selected time intervals during the hydration. Based on the measured data the dTDAc urves course has been described and the results have been compared with the curves of differential thermal analysis. To characterize the microstructure of the cement paste during the considerable shrinkage at higher temperatures the images by scanning electron microscope have been acquired.
|
|
|
Analytical methods for determination of polyhydroxyalcanoates content in bacterial cells
Černayová, Diana ; Enev, Vojtěch (referee) ; Sedláček, Petr (advisor)
This bachelor thesis deals with methods that are used for determination of polyhydroxyalkanoates (PHA) in cells of bacteria Cupriavidus necator H16. To the applied methods belong Fourier transform infrared spectroscopy, Raman spectoscopy, turbidimetry and thermal analysis (thermogravimetric analysis and differential scanning calorimetry). The results of each method were compared to amount of PHA determinated by gas chromatography. Fourier transform infrared spectroscopy and Raman spectroscopy revealed a linear relation between ratio of characteristic peaks and amount of PHA. FTIR enabled to determine not only the quantitative amount of PHA, but the quality of the sample (cristallinity, amorphous state) as well. Another method was turbidimetry, which has shown correlation between dispersion of UV-VIS light to amount of PHA in bacterial cells. Thermogravimetric analysis was the most effective technique for determination of PHA. The dependence of weight loss of PHA on its content (found by gas chromatography) was determined with the highest accuracy to gas chromatography. Tha last method- DSC was not alternative replacement for quantitative PHA determination. However, DSC indicated crystalline and amorphous state of the polymer.
|
|
|
The hydration of hyaluronic acid
Průšová, Alena ; Šimon, Peter (referee) ; Kučerík, Jiří (advisor)
Hydratace patří mezi nejdůležitější faktory ovlivňující sekundární strukturu a tím i funkci molekul v živých systémech. Díky vysoké afinitě tvoří molekuly vody specifické struktury jejichž složení a fyzikální vlastnosti jsou ovlivněny přítomností studované látky. Hyaluronan patří mezi biomolekuly s obrovskou schopností vázat a zadržovat vodu. Cílem této práce bylo prozkoumat hydratační vlastnosti hyaluronanu o různé molekulové hmotnosti a vyčíslit množství molekul vody v jednotlivých hydratačních vrstvách. V první části práce byla využita metoda diferenční kompenzační kalorimetrie. V druhé části diplomové práce, na základě rozdílné kompresibility, byla vázaná voda studována metodou vysoko rozlišovací ultrazvukové spektroskopie.
|
|
| |
|
|
Influence of bioplastics´ biodegradation on soil quality
Paluchová, Natálie ; Doležalová Weissmannová, Helena (referee) ; Kučerík, Jiří (advisor)
V poslední době se pozornost polečnosti obrátila k mikroplastům. Jsou produkovány různými odvětvími a šíří se napříč prostředím. Po dlouhou dobu byly považovány za inertní, bez dalšího vlivu na rostliny a jiné živé organismy, avšak jak zjistily nedávné studie, mohly by představovat vážnou hrozbu. Několik vědců, včetně nás, se proto začalo soustředit na jejich transport a transformace v životním prostředí. Většina se však zaměřuje pouze na jejich přítomnost v mořských a sladkých vodách, a proto jejich chování ve vzduchu a půdě zůstává nejasné. Kromě toho byla pozornost soustředěna i na bioplasty. Jsou prezentována jako ekologická alternativa, která má vyřešit všechny dosud zmíněné problémy (a další). Avšak často se zapomíná, že jejich hlavní výhoda může být zároveň nevýhodou. Z tohoto důvodu se tato diplomová práce zaměřuje na negativní účinky spojené s přítomností mikroplastů (konkrétně bioplastu poly-(R)-3-hydroxybutyrátu) v půdě jako jejich běžný receptor. Kombinovali jsme respirometrii, elementární analýzu, termogravimetrii a enzymatické testy, abychom zkoumali fyzikálně-chemické změny v půdě vyvolané přítomností bioplastu. Naše výsledky ukázaly negativní vliv na půdní organickou hmotu a zadržování vody v půdě. V tomto smyslu byl zkoumán i tzv. "priming effect", jelikož docházelo k urychlení a také zpomalení rozkladu půdní organické hmoty. Zaznamenali jsme rozdílný vliv vybraných koncentrací biopolymeru na půdu a také vliv půdních vlastností na průběh degradace. V neposlední řadě zvýšení enzymatické aktivity jasně naznačovalo vliv přítomnosti biopolymeru na mikrobiální komunitu. Na základě takových zjištění jsme došli k závěru, že přidání biopolymeru vede k dlouhodobému dopadu na řadu funkcí půdního ekosystému.
|
guest ::
